Summary :

bad sectors on hard drive

Bad sector refers to a disk sector on a deejay storage unit that is permanently damaged. What can you lot exercise if your hard disk drive has a bad block and how to repair bad sectors on difficult bulldoze? This mail will prove you lot what bad sector is and how to repair bad sector on hard drive.

Quick Navigation :

  • What Is Bad Sector?
  • How to Cheque the Deejay and Mark the Bad Sector?
  • How to Proceed Information Prophylactic When Bad Sectors on Hard Drive?
  • Hard Deejay Bad Sector Repair Proffer
  • Bottom Line
  • Bad Sectors on Hard Drive FAQ
  • User Comments

What Is Bad Sector?

A bad sector, as well called a bad block, is an area of the storage device that is permanently damaged. If the sector is damaged, all data on this bad sector may lose and it will be no longer reliable for storing data and files. When in that location are more bad sectors than the mount stated that is allowed by the manufacturer, the hard drive will stop working.

There are two types of bad sectors – physical bad sector and logical bad sector. A concrete bad sector is a cluster of storage on the hard drive that's physically damaged. A logical bad sector is a cluster of storage on the difficult drive that appears to not be working properly.

In full general, bad sectors will atomic number 82 to many bug, such as data loss, scanning and repairing bulldoze stuck and and then on.

Then what can you lot do if your hd has a bad cake or do you lot know how to fix bad sectors on hard drive?

If no, please go on your reading and nosotros will prove you some bad sector repair suggestions.

How to Check the Disk and Mark the Bad Sector?

Before going on bad sectors repair solutions, yous need to mark the bad sectors every bit unusable on hard drive first. However, if you don't know whether your hd has bad sectors, y'all need to check the hard disk first so mark the bad sectors later.

And at present, we volition evidence yous how to check the disk and marking the bad sectors footstep past step.

Step one: Type the cmd the search box of Windows and correct-click the Command Prompt to cull Run as ambassador.

Step 2: In the popup control line window, type the command chkdsk c:/f /r and hitting Enter to proceed.

type the command and hit Enter to continue

Tip: If you want to bank check other partitions, you need to supercede the C with other drive letters.

Step 3: Then y'all will receive a bulletin which tells you that Chkdsk cannot run considering the volume is in utilize past another procedure. Then you need to type Y to go on. During the restarting procedure, the check disk procedure will be performed.

type Y to continue

Step 4: When the check disk process is finished, the bad sectors on hdd volition be marked as unusable and the operating system will skip the bad sectors in the time to come.

As nosotros have mentioned in the above part, bad sectors on difficult bulldoze may lead to data loss or some worse bug. Therefore, after y'all accept marked the bad blocks as unusable, yous had better back up the files to avoid data loss.

Then exercise you know how to keep information safe if there are bad blocks on hard drive? We will show you.

How to Go on Data Rubber When Bad Sectors on Hard Bulldoze?

To back upwards files, MiniTool ShadowMaker is recommended. Information technology is a piece of professional files backup software which enables you to back upwardly the file, folder, deejay, and partitioning. It can also back up the operating system.

Earlier nosotros go along to the next steps, please download MiniTool ShadowMaker Trial from the following button firstly and nosotros will evidence you the instructions of backing up the files step by step.

Free Download

Step 1: Install the plan, launch it, and click Keep Trial to continue. Choose Connect in This Computer to enter its main interface.

click Connect in This Computer to continue

Pace 2: After entering its chief interface, please become to the Backup page and click Source module to continue. Then choose Folders and Files to cull which files y'all desire to back up.

choose Folders and Files

Stride 3: Returning to Fill-in page, choose Destination module to decide where you desire to save the backup image. Information technology is recommended to choose an external hard bulldoze.

choose a backup destination path

In lodge to provide better protection for data, at that place are 3 important things you need to know.

  1. MiniTool ShadowMaker enables you to create an automatic backup through the Schedule
  2. In gild to manage the deejay infinite, you can change the backup scheme through Scheme The Incremental fill-in scheme is chosen by default.
  3. MiniTool ShadowMaker enables you to set some avant-garde backup parameters through Options.

Pace 4: After you have selected the backup source and destination, you tin click Back up At present to perform this action immediately so as to provide protection for your information.

click Back up Now to continue

When the process is finished, yous can successfully keep your information prophylactic.

MiniTool ShadowMaker is a powerful program which can help to continue my data condom. Afterwards backing up files, don't worry near data loss due to bad sectors on hard drive. Click to tweet

Hd Bad Sector Repair Proposition

At present, information technology's fourth dimension for hard disk bad sector repair solutions. As a thing of fact, the bad sectors can't be repaired direct if it is physical damaged. However, in society to keep data safe, you can cull to clone your disk to some other one.

For case, if there are too many bad blocks on hard drive, more and more than bad sectors on Windows 10 will exist marked every bit unusable and the available space on the hard drive will become less and less. Thus, the advice is to clone your hard drive to another one.

And here, we will show you how to clone a hard drive with ii different means and will show the instructions with pictures step by step.

Use MiniTool ShadowMaker

First of all, nosotros will introduce how to clone a difficult drive with MiniTool ShadowMaker. Too the backup feature, information technology is also a disk clone tool. Then we volition show you lot how to clone a difficult drive footstep by step with pictures.

Thus, you can download MiniTool ShadowMaker Trial from the post-obit button or choose to buy an advanced edition.

Free Download

Step 1: Launch MiniTool ShadowMaker and enter its chief interface with the same method nosotros have introduced in the above role.

Step 2: After that, please become to the Tools tab and click Clone Deejay feature to continue.

choose clone disk feature to continue

Step 3: In the popup window, click Source module to choose which disk you lot desire to clone. Then click Terminate to go along.

choose clone source

Pace iv: Adjacent, click Destination module to select a target disk which should be large enough to relieve all files of the source deejay. Then click End to go on.

select the target disk

Stride five: Then you will receive a alert bulletin which tells y'all that all data on the target deejay will be destroyed. So delight back up important files in advance.

read the warning message carefully

Stride 6: Side by side, the disk cloning process will begin and you demand to await patiently.

wait the process to be finished

Pace seven: When the disk cloning process is finished, you will receive the post-obit bulletin.

the warning information

It means that both the source disk and the target deejay have the same signature, thus you demand to disconnect or remove either of them.

At here, since your source hard disk drive has a bad cake, you lot need to remove the original one and connect the target disk to your reckoner. In addition, if you want to boot your calculator from the target disk, you need to change the BIOS settings.

This is 1 mode to clone a hard bulldoze. If you have met the issue bad sectors on hard drive, you can choose to clone it to another one.

Apply MiniTool Partition Sorcerer

Now, in this part, nosotros will show y'all how to clone a hard drive with some other manner so every bit to protect your data.

Fortunately, to clone a difficult bulldoze, MiniTool has provided another program – MiniTool Division Wizard. It is a professional segmentation manager which is designed to optimize partition and disk use.

It tin can help y'all to extend sectionalization or drift Os to SSD without data loss. It tin likewise help you to bank check disk whether at that place are bad sectors on hard drive with the Surface Exam feature. Thus, with and then many powerful features, you can download i from the following push.

Free DownloadBuy Now

And we will show you how to clone a hard drive with MiniTool Partition Magician then as to avoid information loss when at that place are bad blocks on hard drive.

Step one: Download the software and install and launch it to enter its master interface.

Step 2: Select the disk that you want to clone and choose Copy from the context card. Here, we take the system deejay equally the example.

select the disk you want to clone

Pace three: In the adjacent popup window, you are required to cull a target disk. And click Adjacent to continue.

choose a target disk

Stride iv: So you can see four options. Read them carefully and choose an available ane according to your own needs and click Adjacent to continue.

Annotation: If yous check the option Apply GUID Sectionalisation Table for the target disk, the target disk will be turned to GPT segmentation fashion. In addition, this feature is a paid ane.

check the copy options

Step 5: Then you will be told that if you desire to kicking from the target disk, you need to change the BIOS settings and click Finish to continue.

click Finish to continue

Pace 6: Returning to the chief interface, you can preview that the target disk has a copy of the source disk. Then click Apply to confirm these changes. MiniTool Partition Magician requires restarting the computer and you merely demand to click Restart At present to continue.

click Apply to continue

When the disk clone procedure is finished, you need to remove the original hard drive which has a bad cake and connect the new difficult drive to your computer. So change the BIOS settings.

Equally for repairing bad sector on difficult drive, there is no direct manner. And the check deejay control tin only mark the bad sectors on difficult bulldoze every bit unusable and the operating system volition skip the bad blocks in the future.

Even though there is no straight way to repair bad sectors on difficult bulldoze, y'all can choose to clone your difficult drive to another way and so every bit to avoid data loss.

By the mode, if you have suffered information loss due to the difficult bulldoze bad sector issue, MiniTool Partition Wizard Pro Ultimate can also help yous to recover lost data.

Purchase At present

I have suffered the consequence bad blocks on hard drive. And I choose to clone difficult drive to proceed my data safe. Click to tweet

Bottom Line

In this post, we have introduced what the bad sector is and how to mark the bad blocks as unusable. If you don't whether there are bad sectors on difficult bulldoze, you tin try to utilize the check disk command and try to marker them.

And as for data protection, it is recommended to clone your hard bulldoze to another ane. Even so, if yous have any better solution to repair bad blocks on difficult drive, you can share information technology on the comment zone.

For disk clone, we have introduced two ways and yous tin can have a try. Meanwhile, if yous have any problem of the MiniTool products, please don't hesitate to contact us via the email [electronic mail protected].

Bad Sectors on Hard Drive FAQ

What causes bad sectors in a hard drive?

  1. Overheating
  2. File System mistake.
  3. Over-aging.
  4. Virus or malware assault.
  5. Shut off computer improperly.
  6. Shacking or knocking.
  7. Static electricity.
  8. Dust.

How do I cheque for bad sectors on my hard drive?

Here are 3 ways to bank check bad sectors on difficult drive.

  1. Type chkdsk x: in the Command Prompt.
  2. Cheque bad sectors on hard drive with third-party partition director, such every bit MiniTool Partition Wizard. Its Disk Surface Test feature enables you lot to check for bad sectors on hard bulldoze.
  3. Check bad sector in Partition Backdrop.

What does a bad sector mean?

A bad sector, also called a bad block, it is an area of the storage device that is permanently damaged. The bad sector on the hard drive is an unusable role. If the sector is damaged, all information on this bad sector may lose and it volition be no longer reliable for storing data and files.

Can bad sectors be stock-still by formatting?

The bad sectors include two types: physical bad sector and logical bad sector. The physical bad sectors can't exist repaired and they tin can only be marked as unusable. The logical bad sectors may be acquired by the working improperly, which can be fixed by the low-level formatting or the Windows disk check tools.